HYBRID WOOD IS A RACK SERIES WITHIN THE HYBRID RACK SERIES WHERE THE ALUMINUM CORNER PILLARS ARE DRESSED IN SOLID WOOD BOTH ON THE FRONT AND ON THE SIDE TO GIVE A MORE WARM AND HOME FRIENDLY TOUCH
The solid wood is available in black oak, cherry, oak and walnut of highest quality. These pillars are best fitted with the veneered shelves or concrete shelves, both with and without integrated isolation system.
The pillars can be ordered with or without integrated isolation system. The integrated corner pillar isolation is mainly made to isolate the larger top shelf. The isolation is based on mechanical suspension system that very efficiently cancel all non desired vibration that origin from the floor or from the equipment itself. In Hybrid Wood the isolation system is as discrete as possible providing your rack with an elegant touch.
Standard pillar lengths are 200, 275, 350 and 670mm. Turntable top shelves are also available for the Hybrid Wood series. The turntables are made of a sandwich board available in black oak, oak, walnut and cherry. Hybrid Wood rack can also be equipped with a sideboard for the purpose to hold your minor itmes such as remote, RIA or CD covers.
HYBRID wood DOWNLOADS
Hybrid data sheet
Hybrid Review HIFI & Musik
Hybrid max load
Hybrid wood product portfolio
Hybrid Wood Top Suspension
Hybrid Wood suspension is integrated in the pillars.
Up to 12 Springs per pillar can be used.
One suspended pillars comes with 6 springs, 3 are mounted.
Extra springs can be supplied.
When all 12 springs are mounted can 4 pillars uphold 180kg.
Hybrid Wood Top suspension measurement analysis in 50Hz
• Peak improvement with isolation: 92%
• Vibration source is situated below the object and the sensor above the isolated rack shelf.
