Radius

Radius corner-pillars are made from the finest Swedish Aluminum extrusion and beautifully anodized in either deep black or satin silver finish.

The construction is extremely stable because of the large pillar and high density shelf boards are using a self-stabilizing fixture that makes the rack very rigid.

The choice of Aluminum and extensive internal bracing provides for a very favorable weight/stiffness ratio and a non ringing design.

Three different size of shelves are available, 680; 1000 and 1270mm and four well chosen pillar lengths, namely 65,5; 150; 234,5 and 319 mm. Radius can in this way be tailor made to your needs and wishes. If that was still not good enough, we are making custom pillar lengths between 30-650 mm.

Radius standard racks are available in ten different sizes from 680 mm to 2180 mm length, seven different shelf variants and two different pillar colors, the choice is yours.


Radius Product Portfolio

Radius isolaton system

Radius isolaton system Image
Extremely efficient and adaptable isolation system  The equally safe as ingenious and highly effective Radius Solo isolation device for the shelves is easily integrated into the corner pillar. Assembly of the device is simple, fast and does not require any tools.   Adapting and level adjustment for various weights, as well as unevenly distributed weight, can be easily accomplished at the point of assembly, by increasing or decreasing the amount of springs. If later on, there is a change in equipment used, just add or subtract amount of springs – no tools required.   The suspension kit for top or extension shelves contain all required parts needed for the isolation of the shelf plane. By using appropriate number of the 12 included springs, one can accomplish extremely effective isolation characteristics in all planes for weights ranging 5-20 kg (11-44 lb). The springs are made of high-grade SS1774-04 steel, the highest industrial quality chosen for its superior reliability and non fatigue characteristics. Naturally, one can increase amount of springs to isolate weights up to 60 kg (132 lb), which is the maximum recommended shelf load.

Radius isolaton system

Radius isolaton system Image
Extremely efficient and adaptable isolation system  The equally safe as ingenious and highly effective Radius Solo isolation device for the shelves is easily integrated into the corner pillar. Assembly of the device is simple, fast and does not require any tools.   Adapting and level adjustment for various weights, as well as unevenly distributed weight, can be easily accomplished at the point of assembly, by increasing or decreasing the amount of springs. If later on, there is a change in equipment used, just add or subtract amount of springs – no tools required.   The suspension kit for top or extension shelves contain all required parts needed for the isolation of the shelf plane. By using appropriate number of the 12 included springs, one can accomplish extremely effective isolation characteristics in all planes for weights ranging 5-20 kg (11-44 lb). The springs are made of high-grade SS1774-04 steel, the highest industrial quality chosen for its superior reliability and non fatigue characteristics. Naturally, one can increase amount of springs to isolate weights up to 60 kg (132 lb), which is the maximum recommended shelf load.