Hybrid Standard

Solid Tech’s Hybrid comes from a long heritage of award winning rack engineering and features all the top state-of-the-art engineering qualities that you would expect.

Picture: Hybrid built with three Isolation shelf-kits, corner pillars and extrusion in black anodized aluminum. Top shelf with isolation, Cable carriers and the Spike Fixed Floor Protectors.
Picture: Hybrid building blocks (shelf-kit and corner pillars) 

The Hybrid’s latest developments allow flexibility like never before. Starting for example with a 4-shelf vertical rack you can easily reassemble with the focus on horizontal expansion such as a 2-shelf racks side by side. If needed later, you can build vertically again while keeping the horizontal foundation from earlier. With this type of flexibility there are endless of options to explore, meaning you can design the optimum A/V rack and tweak according to any changes you wish to make without any loss of platform-stability. Hybrid pillars and extrusions are available in silver or black anodized aluminum.

Click here to read all about Hybrid

Hybrid Product Configurator

Hybrid Product Configurator


Hybrid Product portfolio

Hybrid Isolation Shelf Kit HD

The Hybrid Isolation shelf-kit HD has an inbuilt unsurpassed isolation system that isolates each level from each other as well as from the floor.
Hybrid Isolation shelf-kit HD isolates the equipment from vibration using two shelves with a mechanical suspension system in-between.
The advantage is that each module will be individually isolated and the rack will keep its stability.

The HD variant is made to withstand even higher loads than the isolation shelf-kit. The integrated isolation system in the Isolation shelf-kit HD is even more efficient as it is based on tension spring compared to compression spring used in the Isolation shelf-kit.

The Hybrid Isolation Shelf-kit HD comes with a spring system that contains as many as 48 springs in total and can bear a maximum load of 90kg (24 springs) or 180kg (48 springs). It is easy to adjust the amount of springs in order to optimize the isolation efficiency.

The Isolation shelf-kit HD can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

Size of the shelf is 435mm x 495mm x 60-70mm.

The Isolation shelves can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

The bottom shelf is available in the following configurations:

  • Bottom shelf: black and white
  • The top shelf: black, white, walnut, cherry, oak, black oak and concrete
  • Extrusions: black and silver

Measurement performance in 50Hz

• 30kg loaded on 4 isolator spots with 3 springs per spot
• Peak improvement with isolation: 90%
• Vibration source is situated below the object and the sensor above the isolated rack shelf.

The mounting of Isolation shelf-kit HD

https://youtu.be/2RCOh3GCwhk


[embed]https://youtu.be/2RCOh3GCwhk[/embed]