Base of Silence is a standalone isolation shelf that will decouples any kind of hifi equipment from undesired vibrations
The isolation shelf can be used in any non isolated system support solution or just on the floor as a stand alone amp-stand. The Base of Silence is made of a sandwich shelf with well chosen layers in order to isolate as efficient as possible. Inside the shelf is incorporated four separate mechanical isolator units that will reduce any low level vibration with around 90%.
The base can be adjusted to isolate loads from 8kg to 180 kg.
Base of Silence has a size of 435x495x60-70mm (17,1×19,5×2,4-2,8In) and is available in fourteen different variants. Two base colors, black or white and the top shelf is available in 6 different lacquers or veneers (black, white, walnut, cherry, oak, black oak) and concrete.
To ensure the board is leveled adequately, it has a bubble level integrated on the top shelf.
The graph shows a comparison of isolation using the Base of Silence versus not using isolation, the example is performed at 50 Hz and the efficiency is 85-90%.
base of silence DOWNLOADS
Hybrid data sheet
Base of Silence product portfolio
Base of Silence data sheet
Base of Silence
Base of silence consists of a sandwich board with four integrated isolators. The sandwich board has the same size as a standard Hybrid shelf, 435mm x 495mm x 60-70mm. The isolator shelf consists of a 30mm MDF, 3 mm cork and on top a 19mm veneered HD MDF or 22mm concrete.
Base of Silence is available in seven variants, lacquers/veneers(black, white, walnut, cherry, oak, black oak) and concrete.
The base will be prepared for a load of maximum 90kg. 24 extra springs are available to increase the max load to 180kg. The lightest load to give a hearable effect is 8kg.
Bubble level is optional and can be located either on the short side or long side.
Below graph shows a comparison of isolation using the Base of Silence versus not using isolation, the example is performed at 50 Hz and the efficiency is 85-90%.
Base of silence consists of a sandwich board with four integrated isolators. The sandwich board has the same size as a standard Hybrid shelf, 435mm x 495mm x 60-70mm. The isolator shelf consists of a 30mm MDF, 3 mm cork and on top a 19mm veneered HD MDF or 22mm concrete.
Base of Silence is available in seven variants, lacquers/veneers(black, white, walnut, cherry, oak, black oak) and concrete.
The base will be prepared for a load of maximum 90kg. 24 extra springs are available to increase the max load to 180kg. The lightest load to give a hearable effect is 8kg.
Bubble level is optional and can be located either on the short side or long side.
Below graph shows a comparison of isolation using the Base of Silence versus not using isolation, the example is performed at 50 Hz and the efficiency is 85-90%.
Base of Silence data sheet
Base of Silence
Base of silence consists of a sandwich board with four integrated isolators. The sandwich board has the same size as a standard Hybrid shelf, 435mm x 495mm x 60-70mm. The isolator shelf consists of a 30mm MDF, 3 mm cork and on top a 19mm v
Read More
Base of silence consists of a sandwich board with four integrated isolators. The sandwich board has the same size as a standard Hybrid shelf, 435mm x 495mm x 60-70mm. The isolator shelf consists of a 30mm MDF, 3 mm cork and on top a 19mm v
Read More
Base of Silence data sheet
