Balance is developed to color the sound as little as possible. The great stability is achieved by using thick high-density shelves and corner posts that can be filled with sand.
Balance is the winner in the Accessory HIFI category in the famous HIFI+ magazine. Read the full review here:
The shelves are 22mm thick with a very high load capacity. The shelves are available with or without built-in isolation. The isolation system effectively decouples the equipment from external or internal vibrations.
Balance stand is based on the same corner post as our Radius stand and offers the same scalability, which means you can build the stand both horizontally and vertically with the four well-chosen post lengths, namely 65.5; 150; 234.5 and 319 mm.
Balance with its retracted corner pillars are designed to primarily give as much highlight to the equipment as possible. The shelves are made of waxed oak to preserve the natural wooden feel and corner posts in black or silver anodized aluminum
Four shelf color variants are available:
1. Silk oak 2. White oak 3. Black oak 4. Tobacco oak
Balance Product Portfolio
Spike Fixed Floor Protectors
In order to satisfy each client wish and desire is Solid Tech now introducing the Spike Fixed Floor Protector. Using spike is always necessary as it is well known that it increases the sound quality extensively. However standard floor protectors may scratch the floor if the rack/loudspeaker stand is accidentally moved out of place. The new floor protector has a stainless spike integrated and incapsulated in the aluminum cover in order stay fixed to the floor protector if the rack is moved. Beneath the spike is located a brass spacer that aim to avoid any non-desired resonance or ringing. In the bottom of the floor protector is attached a sheet of cork to damp and protect the floor from the hard metal. The measures are D50xH45mm and the thread is available both in M8 or M6. The foot will build 26-40mm (added height between end of pillar to the floor).
Note:
M6 is mainly for non Solid Tech audio equipments/speaker stand.
Solid Tech always uses M8 thread.