Hybrid Full Length

Hybrid Full Length with TT-shelf, Isolation shelves, Hybrid Isolation, cable carriers and Feet of Concrete

“Hybrid full length” is a ultra rigid solution that offers corner-pillars in full length. Available lengths are 670 and 900 mm.

The Hybrid Full Length rack consists  of 900 or 670 mm Corner-Pillars, the Hybrid-Shelf-Kit or Hybrid-Isolation-Shelf-kit and a dedicated Hybrid turn table shelf supported by the unsurpassed Hybrid Isolation System (optional).

In the 900 mm version the total available space between the three shelf trays is 680 mm (using standard shelves). The user can freely determine the amount of shelves to use pending the equipment sizes, as the shelves are fully adjustable along the corner-pillar length.

Click here to read all about Hybrid

Hybrid Isolation Shelf Kit HD

The Hybrid Isolation shelf-kit HD has an inbuilt unsurpassed isolation system that isolates each level from each other as well as from the floor.
Hybrid Isolation shelf-kit HD isolates the equipment from vibration using two shelves with a mechanical suspension system in-between.
The advantage is that each module will be individually isolated and the rack will keep its stability.

The HD variant is made to withstand even higher loads than the isolation shelf-kit. The integrated isolation system in the Isolation shelf-kit HD is even more efficient as it is based on tension spring compared to compression spring used in the Isolation shelf-kit.

The Hybrid Isolation Shelf-kit HD comes with a spring system that contains as many as 48 springs in total and can bear a maximum load of 90kg (24 springs) or 180kg (48 springs). It is easy to adjust the amount of springs in order to optimize the isolation efficiency.

The Isolation shelf-kit HD can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

Size of the shelf is 435mm x 495mm x 60-70mm.

The Isolation shelves can be used in both Hybrid standard, Hybrid Full Length as well as Hybrid Wood.

The bottom shelf is available in the following configurations:

  • Bottom shelf: black and white
  • The top shelf: black, white, walnut, cherry, oak, black oak and concrete
  • Extrusions: black and silver

Measurement performance in 50Hz

• 30kg loaded on 4 isolator spots with 3 springs per spot
• Peak improvement with isolation: 90%
• Vibration source is situated below the object and the sensor above the isolated rack shelf.

The mounting of Isolation shelf-kit HD

https://youtu.be/2RCOh3GCwhk


[embed]https://youtu.be/2RCOh3GCwhk[/embed]